Skip to product information
1 of 11


3 UNITS! OLED Display 0.96 Inch OLED Display 128X64 Module for Arduino

3 UNITS! OLED Display 0.96 Inch OLED Display 128X64 Module for Arduino

Regular price $9.99 USD
Regular price Sale price $9.99 USD
Sale Sold out
Shipping calculated at checkout.

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. Since the display makes its own light, no backlight is needed. This reduces the power required to run the OLED and is why the display has such high contrast.

This breakout can be used with either an SPI or I2C interface - selectable by soldering two jumpers on the back.  The design is completely 5V-ready, with an onboard regulator and built in boost converter. It's easier than ever to connect directly to your 3V or 5V microcontroller without needing any kind of level shifter!

No embedded fonts inside the OLED controller, user can create the fonts through the font generation software.


High resolution: 128 * 64

Viewing angle:> 160 degree

Supports many control chips: Fully compatible with UNO, Mega, 51 Series, MSP430 Series,

STM32 / 2, CSR IC, etc.

Ultra-low power consumption: full screen lit 0.08W

Display area: 29.42 x 14.7mm

Voltage: 3V ~ 5V DC

Working Temperature: -30 c ~ 70 c

Module Size: 27.0MM * 27.0MM * 4.1MM

I2C/IIC Interface, need 2 IO only.

Driver IC: SSD1306

Character Color: Blue


Pin definitions:

1> GND (power ground)

2> VCC (positive power supply)

3> SCL (clock line)

4> SDA (data line)


Shipping & Returns


Care Instructions

View full details