Arduino
*NEW!* Compatible with Arduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3
*NEW!* Compatible with Arduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3
Regular price
$24.99 USD
Regular price
Sale price
$24.99 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
The R4 WiFi is designed around the 32-bit microcontroller RA4M1 from Renesas while also featuring a ESP32 module for Wi-Fi® and Bluetooth® connectivity. Its distinctive 12x8 LED matrix makes it possible to prototype visuals directly on the board, and with a Qwiic connector, you can create projects plug-and-play style.
The MCU on the board is the high performance Renesas RA4M1 (Arm® Cortex®-M4) with a 48 MHz clock speed, 32 kB SRAM and 256 kB flash memory. This MCU features an RTC, a DAC and a CAN bus and has support for HID via USB.
The UNO R4 WiFi also features an ESP32-S3 for Wi-Fi®/Bluetooth® connectivity, which can also be separately programmed via a specific header.
Note on ESP header: the ESP32-S3 module on this board operates on 3.3 V. The ESP header located close to the USB-C® connector is 3.3V only and should not be connected to 5 V. This may damage your board.
Note on Qwiic connector: the Qwiic connector on this board is connected to a secondary I2C bus on this board, IIC0. This connector is 3.3 V only, connecting higher voltages may damage your board. To initialize this bus, use Wire1.begin() instead.
Maximum current draw per pin: the UNO R4 series' maximum current draw per GPIO is 8 mA, which is significantly lower than previous versions. Exceeding this limit may damage your pin / board.
Microcontroller | ||
---|---|---|
Renesas RA4M1 (Arm® Cortex®-M4) | ||
Radio Module | ||
ESP32-S3-MINI-1-N8 | ||
USB | ||
USB-C® | Programming Port | |
Pins | ||
Digital I/O Pins | 14 | |
Analog input pins | 6 | |
DAC | 1 | |
PWM pins | 6 | |
External interrupts | 2,3 | |
Communication | ||
UART | Yes, 1x | |
I2C | Yes, 1x | |
SPI | Yes, 1x | |
CAN | Yes 1 CAN Bus | |
Power | ||
Circuit operating voltage | 5 V (ESP32-S3 is 3.3 V) | |
Input voltage (VIN) | 6-24 V | |
DC Current per I/O Pin | 8 mA | |
Clock speed | ||
RA4M1 | 48 MHz | |
ESP32-S3-MINI-1-N8 | up to 240 MHz | |
Memory | ||
RA4M1 | 256 kB Flash, 32 kB RAM | |
ESP32-S3-MINI-1-N8 | 384 kB ROM, 512 kB SRAM | |
Dimensions | ||
Width | 68.85 mm | |
Length | 53.34 mm |
Materials
Materials
Shipping & Returns
Shipping & Returns
Dimensions
Dimensions
Care Instructions
Care Instructions
![*NEW!* Compatible with Arduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3](http://boardsandsensors.com/cdn/shop/files/57_4a62907f-c4b1-4820-bcbf-e99b3d44d917.jpg?v=1720534527&width=1445)
![*NEW!* Compatible with Arduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3](http://boardsandsensors.com/cdn/shop/files/57_51ceb23f-13fd-481a-8f73-e8edfe96296a.jpg?v=1720534527&width=1445)
![*NEW!* Compatible with Arduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3](http://boardsandsensors.com/cdn/shop/files/57_b546188a-2ee3-48f7-bd75-53bad35cb358.jpg?v=1720534527&width=1445)
![*NEW!* Compatible with Arduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3](http://boardsandsensors.com/cdn/shop/files/57_30e348f0-e9f1-4ff8-8e1e-6b8a95ea4f4b.jpg?v=1720534527&width=1445)
![*NEW!* Compatible with Arduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3](http://boardsandsensors.com/cdn/shop/files/57_d6768ebd-1e7e-497d-bee1-b055dfc67f9c.jpg?v=1720534527&width=1445)
![*NEW!* Compatible with Arduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3](http://boardsandsensors.com/cdn/shop/files/57_de8dcf06-e505-4477-915c-3d6ec3620d92.jpg?v=1720534527&width=1445)
![*NEW!* Compatible with Arduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3](http://boardsandsensors.com/cdn/shop/files/57_32e7821f-8b8f-4710-8389-5be75b8317f4.png?v=1720534527&width=1445)
![*NEW!* Compatible with Arduino UNO R4 WiFi [ABX00087] - Renesas RA4M1 / ESP32-S3](http://boardsandsensors.com/cdn/shop/files/57_d9148836-28da-4509-a7ec-e24ac657868d.jpg?v=1720534527&width=1445)